Installing The Rmx In A Rack Or As A Standalone; Standalone Realpresence Collaboration Server (Rmx) 4000 Installation; Rack Mount Preparations - Polycom 4000 Hardware Manual

RealPresence®Collaboration Server 4000 Hardware Guide
An RMX Software License is included with the ISDN card and must be registered as part of the Product
Registration and Product Activation. For more information, refer to the ISDN Software Licence document
you received with your shipment.

Installing the RMX in a Rack or as a Standalone

Either place the RMX 4000 on a hard, flat surface such as a desktop or mount it on a 19"/23" rack or a rack
with telescopic rail runners.

Standalone RealPresence Collaboration Server (RMX) 4000 Installation

● Place the RMX 4000 on a flat surface or desktop.
The RMX 4000 must rest on the four feet at the base of the MCU and must be shifted or moved into
position using the two handles attached to the front.

Rack Mount Preparations

● Optional - Depending on the rack installed in your site, you may need to remove the handles if they
are attached to the RMX 4000. Unscrew the handles from the chassis as shown in
Runner Assembly for RealPresence Collaboration Server (RMX)
● Optional - If the opening in the rack that is allocated to the RMX 4000 is exactly 6U, the feet must be
removed from the RMX 4000 to install it in the rack. Unscrew the feet from the chassis as shown in
Telescopic Rail Runner Assembly for RealPresence Collaboration Server (RMX)
Optional feet and handle removal
Polycom, Inc.
Telescopic Rail
4000.
4000.
23