Replacing The Rtm-Ip 4000 Card - Polycom 4000 Hardware Manual

RealPresence®Collaboration Server 4000 Hardware Guide
6 Turn ON the RMX 4000.
7 Login on to the RMX Web Client. When a new ISDN card is installed you are required to do the
following:
a Update your licence. For more information see, RealPresence Collaboration Server
1500/2000/4000 GettingStarted Guide,
b In the ISDN/PSTN Network Services define a New ISDN Network Service. For more information
see, RMX 1500/2000/4000 Administrator's Guide,
Services.

Replacing the RTM-IP 4000 Card

RTM-IP 4000 connections require Ferrite cables when connecting to MPMx/MPRx cards.
The RTM-IP 4000 card on the rear of the RMX 4000 provides connectivity to all the MCU modules. Use the
following procedure to replace the RTM-IP 4000 card.
To replace the RTM-IP 4000 card:
1 Ensure that the power switch/circuit switch on the RMX 4000 is turned OFF (O).
2 Remove the cables connected to the card.
3 Unscrew the captive screws on the rear panel of the RMX 4000 that secure the
RTM-IP 4000 card.
4 Use the metal ejector levers to pull the RTM-IP 4000 card out of its slot in the backplane.
5 Carefully slide the RTM-IP 4000 card out through the rear panel.
6 On the card to be installed, move the ejector levers to their fully open position.
Polycom, Inc.
Chapter 4: Product Registration.
Adding/Modifying ISDN/PSTN Network
67