Polycom 4000 Hardware Manual page 22

RealPresence®Collaboration Server 4000 Hardware Guide
Write down the RMX's serial number that is on a sticker on the back of the unit. It will be needed for
product registration later in the process.
Make sure that boxes contain all the required parts.
4 Remove the boxes and top Stratocell®.
5 Holding the handle on each side, lift the RMX 4000 from the box, and place it on a flat surface or
install it in a rack. Remove any packaging material prior to positioning the RMX 4000.
Attention:
Two people are required to lift the MCU out of the box and when installing it in a rack.
Installing the RTM ISDN Card on the RealPresence Collaboration
Server (RMX) 4000
The ISDN card is shipped out of the box and must be manually installed into the rear of the RMX 4000. It is
recommended that the ISDN card be installed before the RMX 4000 is installed in a rack. For more
information on installing the ISDN card,
Polycom, Inc.
Installing or Replacing the RTM ISDN Card.
22