Special Pages - Xerox ColorQube 9301 User Manual

7. Select OK to confirm the selections and run the job.
Note: The default reading order of the booklet is from the left page to the right page. If a different
reading order is required, the system administrator can use Tools to display a reading order
option. Refer to Administration and Accounting

Special Pages

The Special Pages feature controls how you add special pages such as covers and inserts to the copy
job. If you have High Volume Finisher and the optional Tray 6 (Inserter) installed, you can feed the
Covers or Inserts from this tray. Media loaded into Tray 6 (Inserter) is not part of the printing process.
If you require printed Covers, you must use pre-printed media or use another tray. Refer to
Media on page 169 for more information.
Note: Special Pages cannot be used with Auto Paper Supply; a paper supply must be specified.
The Special Pages options are:
• Covers enables blank or printed pages to be added to the front, back, or both sides of the set. The
covers can be a different media to the rest of the job. Refer to
• Chapter Starts ensures each chapter starts on a right or left page, as required blank pages are
inserted automatically, if needed. Refer to
• Inserts enables blank pages to be inserted at designated places within the copy sets. Single or
multiple pages can be inserted. This option is also used to insert Pre-Cut tabs into the document.
Refer to Inserts on page 22.
• Exceptions is used to program pages that require printing on a different media to the rest of the
job. Refer to Exceptions
Note: When scanning a 2-sided document and identifying the page number to be entered for
Chapter Starts, Inserts, and Exceptions, count each side as a separate page.
Covers
Use the following instructions to program Covers:
1. On the Copy tab, select the paper you want to use for the main body of the copies.
Note: Special Pages is not available if Auto Paper is selected.
2. If required, load special paper into another paper tray, ensuring that it is in the same orientation
as the paper you are using for the body of the copies.
Update the Paper Settings screen and Confirm the selections.
3. Select the Output Format tab, the Special Pages button, and then Covers.
4. Select Covers Option required:
• Off clears all options selected for covers.
• Front & Back Same is used if the same media and printing options are required for both
covers.
• Front & Back Different is used for front and back covers with different programing
requirements.
• Front Only is used if only a front cover is required.
• Back Only is used if only a back cover is required.
Chapter Starts
on page 23.
ColorQube 9301/9302/9303 Multifunction Printer
on page 195 for more information.
Covers on page 21.
on page 22.
Output Format
Paper and
21
User Guide