Xerox ColorQube 9301 User Manual page 22
Xerox connectkey controller
Hide thumbs
Also See for ColorQube 9301:
- System administrator manual (191 pages) ,
- Administration and accounting (38 pages) ,
- Evaluator manual (24 pages)
Table of Contents
Advertisement
Output Format
5.
Select Printing Option from the drop-down menu for each of the covers required:
•
Blank Cover is used if no printing is required.
•
Print on Side 1 is used to print the first or last page of the document onto side 1 of the front
or back cover sheet.
•
Print on Side 2 is used to print the first or last page of the document onto side 2 of the front
or back cover sheet.
•
Print on Both Sides is used to print the first or last two pages of the document onto side 1
and side 2 of the front or back cover sheet.
Note:
If Front & Back Same is selected, the same programing options are applied to the Front and
Back covers.
6.
Select the paper tray that contains the cover media.
7.
Select Close to return to the Special Pages screen.
A list of the selected Special Pages is displayed on the screen. To make changes, select the item in
the list you wish to change and use Edit. Use Delete or Delete All to delete unwanted entries.
Select Close Menu to exit the drop-down menu.
8.
Select OK to confirm the selections and run the job.
Chapter Starts
Use the following instructions to program Chapter Starts:
1.
On the Copy tab, select the paper you want to use the job.
Note:
Special Pages is not available if Auto Paper is selected.
2.
Select the Output Format tab, the Special Pages button, and then Chapter Starts.
3.
Select the Chapter Starts button.
4.
Select the Page Number box and use the numeric keypad to type a page number for the chapter
start.
5.
Select either On Right Page to print on Side 1, or On Left Page to print on Side 2.
6.
Select the Add button to confirm the selections and add the programed Chapter Start to the list
on the right.
Add further Chapter Starts, as required.
7.
Select Close to return to the Special Pages screen.
A list of the selected Special Pages is displayed on the screen. To make changes, select the item in
the list you wish to change and use Edit. Use Delete or Delete All to delete unwanted entries.
Select Close Menu to exit the drop-down menu.
8.
Select OK to confirm the selections and run the job.
Inserts
Use the following instructions to program Inserts:
1.
On the Copy tab, select the paper you want to use for the main body of the copies.
Note:
Special Pages is not available if Auto Paper is selected.
22
ColorQube 9301/9302/9303 Multifunction Printer
User Guide
Advertisement
Table of Contents
Troubleshooting
