General Care - Xerox ColorQube 9301 User Manual

General Care

General Care
There are a number of maintenance tasks that need to be performed to ensure that the printer
performs at optimum levels:
• Replenish solid ink.
• Replace Cleaning Unit.
• Replace Staple Cartridges (Office Finisher/High Volume Finisher only).
• Empty Waste Ink Tray.
• Empty Hole Punch Waste Container (Office Finisher/High Volume Finisher only).
• Print Quality Maintenance.
• Cleaning Tasks.
CAUTION: When replacing units, DO NOT remove the covers or guards that are fastened with
screws. You cannot maintain or service any of the parts that are behind these covers and guards.
Do NOT attempt any maintenance procedure that is NOT specifically described in the
documentation supplied with your printer.
To place an order for consumables or replacement units, please contact a Xerox representative,
providing your company name, product number, and the printer serial number. An option is available
within CentreWare Internet Services that allows the printer to contact Xerox automatically to order
units when required. Refer to the System Administrator Guide for more information.
Note: For information about locating the serial number, please refer to
page 259.
The printer displays a message on the touch screen when consumables or units require replacing or
emptying. For units nearing the end of life, an initial message is displayed to warn you that the unit will
shortly require a replacement. An additional message is displayed when a unit requires replacing.
Replace the unit when a message instructs you to do so.
Solid ink
Solid ink is added to four receptacles in the
ink loader through an access door at the
top of the printer. The shape of each ink
stick is unique for each color, to prevent
inks sticks being loaded into incorrect
receptacles. Ink can be added to the ink
loader at any time if there is enough room
to accommodate the new stick.
246 ColorQube 9301/9302/9303 Multifunction Printer
User Guide
Further Assistance on