Save Current Settings; Retrieve Saved Settings - Xerox ColorQube 9301 User Manual

4. Type the total quantity required and press the Start button.
One copy set of the job, the Sample Set, is printed.
The Job Progress screen is displayed, and the job is held in Job List.
5. If the Sample Set is acceptable, select Release. The programed number of sets will be produced.
If the Sample Set is unacceptable, select Delete and Delete Job to confirm. The job will be
deleted from the list.
Note: If the Job Progress screen is not displayed, access the job by selecting the Job Status
button. Select the job in the list and select Release or Delete.
Print Multiple Copies
To produce multiple copies:
1. Press the Services Home button and then touch Copy.
2. Program and scan the first segment:
a. Load the originals for the first segment.
b. Select the required settings, such as layout adjustments, image quality, Build Job, and so on.
3. Use the alphanumeric keypad to type the number of copies and press Start in the control panel.

Save Current Settings

Up to 10 combinations of commonly used feature selections can be retained in the printer memory as
Saved Settings. The printer stores only the programing of the job and NOT the image. Each time Saved
Settings are retrieved and used, the image must be scanned.
To Save
1. Program the required job features.
2. Press the Save Current Settings button on the Job Assembly tab.
3. Select the Setting drop-down menu and use the scroll bar to select the <Available> setting.
4. Use the keyboard to type a name for the saved settings.
5. Select OK.
The settings are stored and can be accessed using the Retrieve Saved Settings feature.

Retrieve Saved Settings

This feature enables you to use Retrieve Saved Settings from the printer memory and apply them to
the current job. Changes can be made to the retrieved settings, but these changes are not stored with
the saved settings.
1. Press the Retrieve Saved Settings button on the Job Assembly tab.
2. Select the required job settings from the list. If needed, use the scroll bar to access all the settings.
3. Select the Load Settings button to retrieve the programing information.
The recalled programing features become active.
To delete a Settings entry, select the Delete Settings option and select Delete to confirm.
ColorQube 9301/9302/9303 Multifunction Printer
Job Assembly
29
User Guide