Copy Output
The most commonly used Copy Output options are selected directly from the Copy tab. The options
available are dependent on the finishing device and kits installed. Refer to
page 13.
•
Collated sorts the copies into sets 1,2,3 1,2,3 1,2,3.
•
1 Staple (Portrait) staples in one of the short edge corners, depending on how the originals are
loaded.
•
1 Staple (Landscape) staples in one of the long edge corners, depending on how the originals are
loaded.
•
Folding a new window opens providing access to the folding options. Refer to
•
Use More to access the following additional output options:
•
Uncollated sorts the copies into stacks 1,1,1 2,2,2 3,3,3.
•
Staple: The stapling options available are dependent on the finishing device available and
the configuration setup. For information about the available finishing devices, refer to
Finishing Devices
•
Off: When staples are not needed, use this option.
•
1 Staple: When this option is selected, a single staple is positioned in the top left corner
of the output.
•
2 Staples: When this option is selected, two staples are positioned parallel to the left or
top edge of the copies.
•
Multi-Staple: When this option is selected, depending on the size of the copy paper,
three or four staples will be positioned parallel to the left edge of the copies. For
example:
• 4 Staples = A4 LEF, A3, 8.5 x 11 in. LEF, 11 x 17 in., 8 x 10 in. LEF.
• 3 Staples = 8 x 10 in. SEF, 8.5 x 11 in. SEF, 8.5 x 5.5 in. LEF, A4 SEF, A5 LEF,
8.5 x 14 in. SEF, B5 SEF.
Note:
SEF is Short Edge Feed, and LEF is Long Edge Feed.
•
Use the Original Orientation option to select the orientation of the originals being
scanned. Select Portrait Originals or Landscape Originals or Upright Images or
Sideways Images.
•
Hole Punching: If the printer is equipped with one of the optional Hole Punch kits, 2
Hole, 3 Hole, 4 Hole, Swedish 4 Hole, or 2 Hole Legal Punch is available.
• Hole punching can be selected only for A4 LEF, Legal SEF, and A3 (8.5 x 11 in. LEF,
Legal SEF, and 11 x 17 in. SEF) paper; and it can be combined with a stapling
option, if required.
• Each sheet is hole punched individually so there is no limit to the number of pages
in the set.
•
Use the Paper Supply option to select the output media required.
on page 13.
ColorQube 9301/9302/9303 Multifunction Printer
Copy Options
Finishing Devices
on
Folding
on page 12.
User Guide
11
Need help?
Do you have a question about the ColorQube 9301 and is the answer not in the manual?