Log In/Out - Xerox ColorQube 9301 User Manual

Log In/Out

Log In/Out

If Authentication or Accounting has been enabled on the printer, you may need to log in before using
some or all of the services. A picture of a lock on a button indicates that you must log in to use that
service.
1. To log in, press the Log In/Out
button on the control panel.
Pressing a locked service will also
prompt you to type your user name
and password.
2. Use the keyboard to type your user
name and then touch Next.
3. Use the keyboard to type your password and then touch Done.
4. If an accounting system is in use on the printer, you may also need to enter additional
information.
• If Xerox Standard Accounting is enabled, you need to log in by using your Xerox Standard
Accounting details.
• If Network Accounting is enabled, you must type your User ID and Account ID.
• If a Foreign Device Interface (FDI) is installed, you are prompted to access by using the
device installed, for example, a card reader or coin slot.
Your user details appear in the User Details area on the right side of the displayed message.
5. To log out, press the Log In/Out button again, or touch the User Details area and touch Log Out
from the drop-down menu.
6. A confirmation screen is displayed; touch Log Out or Cancel.
120 ColorQube 9301/9302/9303 Multifunction Printer
User Guide
ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PRS TUV WXY
7 8 9
*
0 #
C