Xerox ColorQube 9301 User Manual page 172

Trays 1 and 2
2. Place the media in the tray. Media
must be positioned against the left
side of the tray.
• Load pre-printed paper and
labels face up and with the top
toward the front of the printer.
• Load hole-punched paper with
the holes on the right edge.
Paper must not be loaded above the
maximum fill line.
3. Make sure that the paper guides just
touch the paper.
• To position the right side guide, squeeze the clamp mechanism and slide the guide to touch
the right edge of the media.
• To position the rear guide,
squeeze the clamp mechanism
and slide the guide to touch the
rear edge of the media.
4. Close the paper tray.
The paper settings for the tray are
displayed on the touch screen.
5. Touch Confirm or change the
settings, as required.
172 ColorQube 9301/9302/9303 Multifunction Printer
User Guide