Auto Center; Sided Copying - Xerox ColorQube 9301 User Manual

Copy Options
Independent %
This selection enables you to set different reduction or enlargement ratios for the X (width) and the
Y (height) of the image. This produces a distorted copy of the original.
• Select the resize button
Width - X% and Length - Y% ratios required.
• Use the Presets (X-Y%) buttons to select 100%/100%, Auto Independent X-Y% or commonly used
ratios set up by your administrator. The selected X and Y ratios in percentages are shown next to
the button, together with an example application.
Use 100%/100% to produce an image the same size as your original.
Auto Independent X-Y% automatically fits the image of your original onto the paper you select.
The reduction or enlargement is not proportional, and the printer distorts the image to fit onto the
paper. Specify a paper tray before you use this option.

Auto Center

This option can be selected with either the Proportional or Independent options to position the image
in the center of the paper selected.
Paper Supply
On the Paper Supply section of the Copy tab, you can select a paper tray, the paper size required, or
Automatically Select. Use More to access all the options.
• Automatically Select automatically selects the appropriate paper size for each original, based on
the size of the original and any directly selected magnification ratios.
• Alternatively, you can select a paper tray that contains the size and type of paper you require. The
size and type of media loaded in each tray is displayed.
When More is selected, the Paper Supply screen is displayed showing all the trays and the confirmed
size and type of media loaded in each tray.
• A user can select a tray to use from this list. The chosen tray is highlighted in blue.
• If the Auto Tray Switching feature is enabled and the same size and type of media is loaded in
more than one tray, the printer automatically switches from one tray to another when media in
the active tray runs out.

2-Sided Copying

The printer provides options to make 1-sided or 2-sided copies from 1-sided or 2-sided originals, using
either the automatic document feeder or the document glass. The options are:
• 1>1-Sided Use this option if the originals are printed on one side and you want 1-sided copies.
• 1>2-Sided: Use this option if the originals are printed on one side and you want 2-sided copies.
You can also press the Rotate Side 2 button to have the second page rotated 180
• 2>2-Sided: Use this option if you want to make 2-sided copies from 2-sided originals. You can also
press the Rotate Side 2 button to have the second page rotated 180
• 2>1-Sided: Use this option to make 1-sided copies from 2-sided originals.
Note: If using the document glass to scan originals, the printer displays a message when ready to
scan side 2.
10 ColorQube 9301/9302/9303 Multifunction Printer
User Guide
and use the numeric keypad or the arrow buttons to enter the
o
.
o
.