Differences From Target Printer Emulation; Discarded Commands; Select Extended Character Set (Sfcc Oset;N); Download A Language (Sfcc V) - Genicom GEK 00031B Programmer's Manual

DIFFERENCES FROM TARGET PRINTER EMULATION

Discarded Commands

Chapter 4. Printronix P Series Emulation
The following commands from the target printer are parsed by the
current P-Series emulation and then discarded:

Select Extended Character Set (SFCC OSET;n)

The fonts required for this command were not available on the P-
Series.
Sequence discarded.

Download a Language (SFCC V)

The complete sequence SFCC V {QQQ} E {AAA} E {SSSSS} E (data) is
parsed and discarded and the number of characters specified by the
parameters as download data are also discarded.

Download a Character Shape (SFCC c)

The complete sequence SFCC c{PP} {SSSSSE} {A} (data) is parsed and
discarded and the number of characters specified by the parameters
as download data are also discarded.

Postnet Bar codes (SFCC |p*xxxxx-yyyy-zz*)

Sequence discarded.

Ribbon Minder Enable/Disable (SFCC r E/SFCC r D)

Sequence discarded.
"Ribbon Minder" is a trade mark of Printronix, Inc.

Ribbon Minder Set Job Rate (SFCC r J nnnn E)

Sequence discarded.

Ribbon Minder Worn Message (SFCC r A n)

Sequence discarded.
NOTE
104
GEK-00029B