Genicom GEK 00031B Programmer's Manual page 166

DECFLM
DECDFM
Chapter 7. Dec LG/Compaq LG Plus Emulation
(continued)
Sample DECFLM Sequence
ESC P 0 ; 3 & p 04Memo%@00234 ESC \
144 P1 59 P2 38 112 record 156
Decimal:
90 P1 3B P2 26 70 record 9C
Hex:
BASIC: CHR$(144);CHR$(P1);CHR$(59);CHR$(P2);"&p";
record;CHR$(156);
The forms remain selectable until new forms are loaded using
the replace all command, another form with the same number
is loaded, or if the printer power is turned off.
Delete Forms Sequence: Deletes forms from printer memory.
General Command Syntax
DCS Ps & q forms id ST
Ps = 0 Delete form that matches the forms id string.
Ps = 3 Delete all stored forms.
Indeterminate Conditions
The FORM ID string identifies the forms to be deleted. If more than
one Form ID is listed, separate them with semicolons. Form Ids with
more than ten characters are ignored.
If you try to delete a form while it is printing, the printer will ignore
the delete command.
144 Ps 38 113 FORMS ID 156
Decimal:
Hex: 90 PsH 26 71 FORMS ID 9C
BASIC: CHR$(144);CHR$(ps);"Sq";forms id;CHR$(156);
NOTE
166
GEK-00029B