Genicom GEK 00031B Programmer's Manual page 215

DECCAVT
DECCRNLM
DECHTS
GEK-00029B
Clear All Vertical Tabs: Clears vertical tab stops.
Source: Application
Format
ESC 4
Description
See Tabulation Clear (TBC) with Ps = 4.
Notes to Software
This command is included for backwards compatibility with older
printers only. Conforming software should not use this command.
Carriage Return /New Line Mode: Instructs the printer whether to
perform a Line Feed (LF) upon receipt of a Carriage Return (CR).
Source: Print manager
Format
CSI ? 4 0 h
CSI ? 4 0 1
Description
If DECCRNLM is set and a CR is received, the active position
advances to the Line Home Position of the next line. If DECCRNLM is
reset and a CR is received, the active position returns to the Line
Home Position of the current line.
Notes to Software
Print managers developed by Digital handle record terminators
without using Carriage Return/New Line Mode. This command is
available for third-party Print managers.
Horizontal Tab Set: Executes Horizontal Tab Set (HTS).
Source: Application
Format
ESC 1
Description
See HTS in the Control Characters section, p. 202.
Notes to Software
This command is included for backwards compatibility with older
printers only. Conforming software should not use this command.
Destination: Level 2
(outmoded command)
Destination: Levels 2, 3
CR acts as New Line.
CR acts as Carriage Return.
Destination: Level 2(outmoded
command)
215
5000 Series Programmer's Manual