Genicom GEK 00031B Programmer's Manual page 214

DECAWM
DECCAHT
Chapter 8. PPL3 Plus Emulation
Error Handling
The printer accepts the User Preference Supplemental character set
selection even if the selected character set is not currently available.
The character set may be downloaded before imaging text. If the
character set is still not available when an imaging function is
attempted, the printer follows the action taken on a character set
fault.
If Ps does not have the appropriate value for the D ... D identifier, a
character set fault results.
Autowrap Mode: Instructs the printer whether to execute an
automatic Carriage Return/Line Feed when the active position
exceeds the right margin.
Source: Application
Format
CSI ? 7 h
CSI ? 7 1
Description
When DECAWM is set and the active position is beyond the right
margin, printable characters that follow are printed on the next line
beginning at the Line Home Position. When DECAWM is reset, all
printable characters received beyond the right margin are ignored
(truncated).
The printer never autowraps text during justification. See JFY for
more information.
The printer always autowraps during Control Representation Mode
(CRM).
Clear All Horizontal Tabs: Clears horizontal tab stops.
Source: Application Destination: Level 2
(outmoded command)
Format
ESC 2 1/11 3/2
Description
See Tabulation Clear (TBC) with Ps = 2.
Notes to Software
This command is included for backwards compatibility with older
printers only. Conforming software should not use this command.
Destination: Level 2
Set Autowrap mode.
Reset Autowrap mode.
214
GEK-00029B