Additional Escape Sequences; Unsupported Escape Sequences - Genicom GEK 00031B Programmer's Manual

ADDITIONAL ESCAPE SEQUENCES

UNSUPPORTED ESCAPE SEQUENCES

GEK-00029A
The following escape sequences are supported by this emulation, but
are not part of the FX-286e command set:
ESC ( t Assign a code page to one of four variables
(0, 1, 2, or 3)
ESC ( T Assign a code page to variable "1"
ESC j n Reverse n/216 paper move
ESC 1 Select 7/72-inch line spacing.
The following escape sequences from the FX-286e command set are
not supported by this emulation and are therefore discarded:
ESC EM Sheet feeder
ESC % User-defined character set
ESC & User-defined characters
ESC 8 Paper out sensor on
ESC 9 Paper out sensor off
ESC : Copy ROM to RAM
ESC a NLQ justification
125
5000 Series Programmer's Manual