Bar Code Dimensions - Genicom GEK 00031B Programmer's Manual

Chapter 2. ANSI Emulation

Bar Code Dimensions

The following dimensions are for barcodes printed at 0 and 180
degrees rotation. Barcodes printed at 90 or 270 degrees rotation
will be compressed by a 6:5 ratio due to the difference in size of
the horizontal and vertical grids.
p2 Bar code height in 1/12-inch increments
Minimum:
Maximum:
Default:
Human-readable line is not included in height.
p3 Human-readable line
0=Do not print human-readable line
1=Print human-readable line (default)
p4 Narrow bar width, number x 1/120 inch
Default:
Range:
p5* Wide bar width, number x 1/120 inch
Default:
Range:
p6 Narrow space width, number x 1/120 inch
Default:
Range:
p7* Wide space width, number x 1/120 inch
Default:
Range:
p8* Intercharacter space width, number x: 1/120 inch
Default:
Range:
* Parameters <p5>, <p7>, and <p8> are not programmable in some
bar code styles since they are generated from other parameters.
NOTE
1=l/12 inch
120=10 inches
9=9/12 inch (3 / 4 inch)
2 (2/120 inch, approximately .017 inch)
2, 4, 6, . . . 126
6 (6/120 inch, approximately . 050 inch)
2, 4, 6, . . . 254
2 (2/120 inch, approximately . 017 inch)
2. 4, 6, . . .126
6 (6/120 Inch. approximately .050 inch)
2, 4, 6, . . . 254
2 (2/120 inch, approximately . 017 inch)
2, 4, 6 . . . 126
48
GEK-00029B