Housekeeping Commands - Genicom GEK 00031B Programmer's Manual

HOUSEKEEPING COMMANDS

Print Control Codes Forces the hex codes 80H to 9FH to become printable symbols in the
Execute Control
Codes
Emulation Reset
Chapter 4. Printronix P Series Emulation
currently selected character set. Cancels the executable control code
operation activated by the SFCC 7.
Format
<SFCC> 6
Decimal: <SFCC> 6
Hex : <SFCC> 36
BASIC: CHR$(<SFCC>);"6";
Indeterminate Conditions
This feature can also be selected from the control panel.
Forces the hex codes 80H to 9FH to execute as control codes.
Cancels the printable control code operation activated by the SFCC 6.
Format
<SFCC> 7
Decimal: <SFCC> 7
Hex: <SFCC> 37
CHR$(<SFCC>);"7";
BASIC:
Indeterminate Conditions
This feature is also selectable by control panel operations.
Initializes all printing parameters to values previously saved. When
reset to the previously saved values, the current line is set to the top-
of-form position. Font, line spacing, international language selection,
margins, form length, skip-over perforation, and character pitch are
reset to previously saved values. Character-by-character and line-by-
line attributes are canceled. The vertical format unit is cleared.
Format
<SFCC> @
Decimal: <SFCC> 64
Hex : <SFCC> 40
BASIC: CHR$(<SFCC>);"@";
92
GEK-00029B