Set Mode; Quick Set Mode - Icom IC-F7000 Instruction Manual

■ Quick set mode

D D Entering quick set mode
q Push [I/O] to enter the Quick set mode.
w Push [√ √ ] or [∫ ∫ ] to select the desired item.
e Push [Ω Ω CLR] or [OK ≈ ≈ ] to set the values or condi-
tions for the selected item.
r Push [I/O] to exit the Quick set mode.
Quick set mode menu changes depending on Dis-
play indication types between 'CHANNEL' indication
and 'FREQUENCY' indication. (p. 7)
• Channel indication
Q-SET-MODE
--LCD-CONT--ç-6-å
--DIMMER----6>0
--TX-PWR----HI
è-RF-GAIN---9
Push √ or ∫
é-SP-OUT----ç-ON-å
--AGC-------ON
--MIC-BL----6
--NB--------HI
è-NB-LEVEL--9
Push √ or ∫
é-SQL-LV----ç-30-å
--FILTER----WIDE
--RIT-------0
--MODE------USB
--BEEP-LV---5
D D Entering quick set mode using the HM-155
q Push [0], [0] to enter the Quick set mode.
w Push [UP] or [DN] to select the desired item.
e Push [Ω Ω CLR] or [OK ≈ ≈ ] to set the values or con-
ditions for the selected item.
r Push [0] to exit the Quick set mode.

SET MODE

[I/O]
• Frequency indication
Q-SET-MODE
--MODE------ç-USB---å
--SQL-LV----30
--PRE-AMP---ON
è-RF-GAIN---9
Push √ or ∫
é-NB--------ç-OFF-å
--NB-LEVEL--5
--AGC-------ON
--TX-PWR----HI
è-FILTER----9
Push √ or ∫
é-RIT-------ç-0-å
--SPLIT-----OFF
--BEEP-LV---5
[UP] / [DN]
[OK ≈]
[0]
[Ω CLR]
6
[∫]/[√]
[Ω CLR]/[OK ≈]
36
5
6