Icom IC-F7000 Instruction Manual page 55

D D Setting GENERAL (group)
q Push [ ∫ ∫ ]/[ √ √ ] several times to select 'GENERAL,'
then push [OK ≈ ≈ ] to edit 'GENERAL.'
é-SELCALL
--ALE-
--GENERAL---å
w Push [ ∫ ∫ ]/[ √ √ ] to select the desired item.
• Push [Ω Ω CLR] to return the set mode menu.
GENERAL-
--DISP-TYPE---FREQ
--COMMENT-----ON
--COMP--------OFF
è-CLOCK-------12:00
e Push [Ω Ω CLR]/[OK ≈ ≈ ] to set the values or condi-
tions for the selected item.
r After all setting is finished, turn power OFF and ON
again to exit the Initial set mode.
Channel/Frequency indication
The display can be set to indicate a receive frequency
or transmit frequency alternately (FREQ) or to indi-
cate both frequencies same time (R–T).
Comment indication
This item allows comment indication at the top of the
display.
Microphone compressor
This item sets the microphone compressor ON or
OFF.
Clock
This item sets the internal clock.
(default: FREQ)
(default: ON)
(default: OFF)
SET MODE
[∫]/[√]
[Ω CLR]/[OK ≈]
GENERAL-
--DISP-TYPE---ç-FREQ-å
--COMMENT-----ON
--COMP--------OFF
è-CLOCK-------12:00
GENERAL-
--DISP-TYPE---FREQ
--COMMENT-----ç-ON-å
--COMP--------OFF
è-CLOCK-------12:00
GENERAL-
--DISP-TYPE---FREQ
--COMMENT-----ON
--COMP--------ç-OFF-å
è-CLOCK-------12:00
GENERAL-
--DISP-TYPE---FREQ
--COMMENT-----ON
--COMP--------OFF
è-CLOCK-------12:00
6
6
52