Receive And Transmit; Basic Voice Transmit/Receive - Icom IC-F7000 Instruction Manual

■ Basic voice transmit/receive

q Check the following in advance.
➥ Microphone is connected.
➥ No mute indication "S," "L" or "V."
• If one of "S," "L" or "V" appears, push [MUTE] sev-
eral times to turn the mute OFF.
Mute indication
[MUTE]
w Selects the desired channel to be received with the
[√ √ ]/[∫ ∫ ] or 10-key pad.
• The S-meter shows signal strength when signal is received.
e Adjust [VOL] to the desired audio level when re-
ceiving a signal.
• If no audio appears, verify 'SP OUT' in the Quick set
mode is set to 'ON.' (see right)
• If the bass or treble of the receive audio is too strong,
select 'RIT' in the Quick set mode and adjust to obtain
clear audio. (see right)
• If Audio is distorted, select 'MODE' in the Quick set
mode and set the desired operating mode. (See right)
r Push [TUNE] to tune the antenna tuner ON, if con-
nected.
[TUNE]
• "Tuning" indicator appears during the first tun-
ing on a channel.

RECEIVE AND TRANSMIT

S
[∫]/[√] [10-key]
[OK ≈ ]
t To transmit on the channel, push and hold [PTT] on
the microphone, and speak into the microphone at
a normal voice level.
Microphone
[PTT]
• The RF meter shows the output power according to your
voice level.
y Release [PTT] to return to receive.
• Entering the Quick set Mode
q While transceiver's power is ON, push [I/O] mo-
mentarily to enter the Quick set mode, then push
[√ √ ] or [∫ ∫ ] to select the item and set the following.
[I/O]
'SP OUT'
é-SP-OUT----ç-ON-å
--AGC-------ON
--MIC-BL----6
--NB--------HI
è-NB-LEVEL--9
'RIT'
é-SQL-LV----30
--FILTER----WIDE
--RIT-------ç-0-å
--MODE------USB
--BEEP-LV---5
'MODE'
é-SQL-LV----30
--FILTER----WIDE
--RIT-------0
--MODE------ç-USB----å
--BEEP-LV---5
w Push [I/O] to exit the Quick set mode.
3
[∫]/[√]
[Ω CLR]/[OK ≈]
12
2
3