Basic Operation; Selecting A Channel - Icom IC-F7000 Instruction Manual

2

BASIC OPERATION

■ Selecting a channel

The transceiver has 400 regular channels and 100
ALE channels. However, the number of channels can
be restricted in programming depending on your
needs. 2 ways of channel selections are available to
suit your operating style.
D D Display selection channel/VFO
CHANNEL indication
ALE-CHANNEL-1
USB-A
RX-12.163.5
NOTE: Channel comment (alphanumeric) disap-
pears during Frequency indication. Also Entering
the Initial set mode is restricted.
D Using up/down keys
When the display selection is selected the channel in-
dication (see above), push [√ √ ]/[∫ ∫ ] on the FRONT
panel or [UP]/[DN] on the microphone to select the
desired channel.
This way is convenient when changing a small num-
ber of channels.
Microphone
7
HI
12:34
[∫]/[√]
or
[UP]/[DN]
VFO (FREQUENCY) indication
USB
RX
TX-12.163.5
0
+
OK
@?
When
SCAN
frequency indication is canceled, and
returns to the channel indication
automatically.
RADTEL
USB
RX 0.499.9
Channel 20
RADTEL
USB
RX 9.999.9
Channel 40
SELCALL
LSB
RX 9.900.0
Channel 9980
HI
S
12:34
or is pushed, the
CALL
HI
--0:55
Push
HI
switch to select
a channel
--0:55
HI
--0:55