Specifications - Icom IC-F7000 Instruction Manual

8

SPECIFICATIONS

D General
• Frequency coverage :
Receive
Transmit
• Type of emission
(depends on version)
• No. of memory Ch.
• Usable temp. range : –10˚C to +60˚C
• Frequency stability
• Power supply
• Current drain
Transmit (typical) at max. power 23 A [AUS]
Receive
• Dimensions (projections not incl.):
Main unit
Controller (RC-26)
Speaker (SP-25)
Microphone (HM-155) 65(W)×105(H)×35(D) mm
• Weight (approx.)
Main unit
Controller (RC-26)
Speaker (SP-25)
Microphone (HM-155) 234 g
• Accessary connector : 8-pin DIN connector
• Controller connector : 8-pin MINI DIN connector
• REMOTE connector : D-sub 9-pin
All stated specifications are typical and subject to change without notice or obligation.
63
(Unit: MHz)
0.5–29.9999
1.6–5.4999 5.73–5.9999
6.7–8.0999 10.0–11.1999
13.4–14.9999 18.0–18.9999
20.0–20.9999 23.0–27.9999
: J3E (USB/LSB), J2B (AFSK),
F1B (FSK), A1A (CW),
A3E (AM)
: 500 channels (max.)
: ±50 Hz
: 13.8 V DC
(negative ground)
(10.8–15.6 V DC)
:
28 A [OTH]
at max. audio 3.0 A
240(W)×72(H)×239(D) mm
150(W)×50(H)×51(D) mm
106(W)×62(H)×46(D) mm
:
4.6 kg
220 g without cable
370 g
(RS-232C/NMEA)
D Transceiver
• Output power :
1.6–27.9999 MHz 100/50/10 W p-p [AUS]
1.6–3.9999 MHz 125/50/10 W p-p [OTH]
4.0–27.9999 MHz 100/50/10 W p-p [OTH]
• Spurious emission : Less than –43 dB
below peak output power
(Less than –40 dB for 3.5–
3.9999 MHz range [OTH])
• Carrier suppression : More than 40 dB
below peak output power
• Unwanted sideband : More than 50 dB
suppression below peak output power
• Mic. connector : 8-pin modular jack
D Receiver
• Sensitivity:
J3E, A1A
(0.5–1.5999 MHz) 28 dBµV emf
14 dBµV
(1.8–29.9999 MHz) 0 dBµV emf
–14 dBµV
A3E
(0.5–1.5999 MHz) 46 dBµV emf
32 dBµV
• Spurious response rejection ratio:
(1.6–29.9999 MHz) More than 70 dB
• AF output power:
(at 13.8 V DC)
Main unit More than 4.0 W at 10%
distortion with a 4 Ω load
Controller (RC-26) More than 2.0 W at 10%
distortion with a 4 Ω load
• CLARITY variable range: ±150 Hz
• SP connector:
Main unit 2-conductor
3.5 (d) mm (
Controller (RC-26) 2-conductor
3.5 (d) mm (
(2.4 kΩ)
(20 dB SINAD)
(10 dB S/N)
(20 dB SINAD)
(10 dB S/N)
(20 dB SINAD)
(10 dB S/N)
1
⁄ ")/4 Ω
8
1
⁄ ")/4 Ω
8