Icom IC-F7000 Instruction Manual page 48

6
SET MODE
D D Setting SCAN
q Push [ √ √ ] several times to select 'SCAN,' then push
[OK ≈ ≈ ] to edit 'SCAN.'
SET-MODE
--CH-LIST-
--ID-LIST
--I/O
è-SCAN-----å
Scan
This item sets the scan function ON or OFF.
Scan speed
This item adjusts the scan speed (rate at which chan-
nels are searched). The scan speed can be set from 1
to 10 with "1" is the slowest and "10" is the fastest.
Scan Group
This item specifies the scanning group from 1 to 3.
Scan resume
This item sets the scan resume ON or OFF.
When scan resume is ON, scan pauses for 10 sec.,
then resumes, or resumes after 2 sec. when the sig-
nal disappears.
Auto start
This item sets the scan resume ON or OFF for Sel-
call or ALE.
When Auto start is ON (1 min.–10 min., 1 min. steps),
scan pauses for setting time after last transmitting,
then resumes.
45
[∫]/[√]
[Ω CLR]/[OK ≈]
(default: ON)
(default: 6)
(default: 1)
(default: ON)
(default: OFF)
w Push [ ∫ ∫ ]/[ √ √ ] to select the desired item.
• Push [Ω Ω CLR] to return the set mode menu.
SCAN
--SCAN--------ON
--SCAN-SPEED--6
--SCAN-GROUP--2
è-SCAN-RESUME-ON
e Push [Ω Ω CLR]/[OK ≈ ≈ ] to set the values or condi-
tions for the selected item.
r After all setting is finished, turn power OFF and ON
again to exit the Initial set mode.
SCAN
--SCAN--------ç-ON-å
--SCAN-SPEED--6
--SCAN-GROUP--2
è-SCAN-RESUME-ON
SCAN
--SCAN--------ON
--SCAN-SPEED--ç-6-å
--SCAN-GROUP--2
è-SCAN-RESUME-ON
SCAN
--SCAN--------ON
--SCAN-SPEED--6
--SCAN-GROUP--ç-2-å
è-SCAN-RESUME-ON
SCAN
--SCAN--------ON
--SCAN-SPEED--6
--SCAN-GROUP--2
è-SCAN-RESUME-ç-ON-å
é-AUTO-START--ç-OFF-å
é-AUTO-MUTE---ON