Split Frequency Operation - Icom IC-F7000 Instruction Manual

2
BASIC OPERATION

■ Split frequency operation

Split frequency operation allows you to transmit and
receive on two different frequencies.
q While in Frequency indication (p. 7), push [I/O] to
enter the Quick set mode.
Q-SET-MODE(VFO)
--MODE------ç-USB----å
--SQL-LV----30
--PRE-AMP---ON
è-RF-GAIN---9
w Push [√ √ ]/[∫ ∫ ] several times to select 'SPLIT,' then
push [Ω Ω CLR] or [OK ≈ ≈ ] to select the split function
ON.
é-RIT-------0
--SPLIT-----ç-ON-å
--BEEP-LV---5
e Push [OK ≈ ≈ ] to select 'DELTA,' then push [OK ≈ ≈ ]
several times to move the cursor to desired tuning
steps, then ush [√ √ ]/[∫ ∫ ] to change the frequency.
p
é-RIT-------0
--SPLIT-----ç-DELTA-å
------------0.000.0
--BEEP-LV---5
• After exiting the Quick set mode, the TX frequency is indi-
cated in the function display.
11
[∫]/[√]
[I/O] [Ω CLR]/[OK ≈]