Programming An Id - Icom IC-F7000 Instruction Manual

5
CHANNEL/ID PROGRAMMING

■ Programming an ID

The IC-F7000 can be programmed three kind of IDs,
Selcall ID, TEL number, ALE ID.
D D Editing an ID
q While pushing and holding [OK ≈ ≈ ], turn power ON
to enter the Initial set mode.
[I/O]
2 kind of ID sizes, 4-digit or 6-digit, are available.
The 'ID SIZE' must be set first in the SELCALL
menu of the Initial set mode. (p.46)
D D Selcall
The IC-F7000 can be stored up to 10 your own IDs
and 90 calling (address) IDs (1–90). 10 your own ID
contains 5 selcall IDs (S1–S5) and 5 TEL call IDs
(T1–T5).
q Push [ ∫ ∫ ]/[ √ √ ] to select the desired ID channel, then
push [OK ≈ ≈ ].
• Push [Ω Ω CLR] to return the call selection menu.
• No displayed channel is a blank channel.
• ID programming screen appears.
é--1-2999-Easten----å
---2-3999-NorthEast-
---3-6999-Western---å
---4-6999-Western
è--5-7999-NorthWest
w After push [OK ≈ ≈ ], edit the 4-digits of appropriate
ID (or 6-digits depending on 'ID SIZE' setting) by
using 10-keypad. Then push [OK ≈ ≈ ].
ç---ID-1022
------NO.x0022
----CH-2000-2999
--DELETE-NO
----åKEY-PUSH-&-HOLD
e Push [ √ √ ] to enter the ID name programming, then
edit the name.
• ID name is available up to 15 characters.
• Push [Ω Ω CLR] or [OK ≈ ≈ ] to edit backspace or space,
respectively
ç---ID-1022
------NO.x0022
----CH-2000-2999
--DELETE-NO
----åKEY-PUSH-&-HOLD
33
[∫]/[√]
[Ω CLR]/[OK ≈]
w Push [ √ √ ] to select 'ID LIST,' then push [OK ≈ ≈ ].
• Call selection menu appears.
SET-MODE
--CH-LIST-
--ID-LIST--å
--I/O
è-SCAN
e Push [ ∫ ∫ ]/[ √ √ ] to select the desired call type, then
push [OK ≈ ≈ ].
• Push [Ω Ω CLR] to return the set mode menu.
--SELCALL-----å
--TEL-NO.
--ALE
----CH-14-RADTEL
è---CH-15-RADTEL
r Push [ √ √ ] to select 'CH' for channel range setting,
then push [OK ≈ ≈ ].
• Edit 4-digits channel number twice.
<Input example>
• Channel range from Ch 12 to Ch 320
Push /, /, z, x, then /, c, x, /.
- Small number must be input first.
ç---ID-1022
------NO.x0022
----CH-12-320
--DELETE-NO
----åKEY-PUSH-&-HOLD
• Discontinuous channels Ch 12 and Ch 320
Push /, /, z, x and /, /, z, x, then push /, c,
x, / and /, c, x, /.
- When input the discontinuous channel, enter the same
channel number twice.
ç---ID-1022
------NO.x0022
----CH-12,320
--DELETE-NO
----åKEY-PUSH-&-HOLD
• Deleting an ID number
q Select an ID number for deleting, push [OK ≈ ≈ ].
w Push [ √ √ ] several times to select 'DELETE NO,'
then push and hold [OK ≈ ≈ ].