Mode Selection; Simple Mode Operation - Icom IC-F7000 Instruction Manual

■ Mode selection

The following modes are available in the IC-F7000:
USB, LSB, AM, CW, FSK, AFSK, ALE-U, ALE-L and
EMAIL.
q Push [I/O] to enter the Quick set mode.
Q-SET-MODE
--LCD-CONT--ç-7-å
--DIMMER----6>0
--TX-PWR----HI
è-RF-GAIN---9
w Push [√ √ ]/[∫ ∫ ] several times to select 'MODE,' then
push [Ω Ω CLR] or [OK ≈ ≈ ] to select the desired
mode.
é-SQL-LV----30
--FILTER----WIDE
--RIT-------0
--MODE------ç-USB----å
--BEEP-LV---5
• The selected mode is indicated in the function display.
NOTE: The selected mode can be used for tempo-
rary operation only. Once changing the channel or
turning OFF the transceiver to return the original
operating mode

■ Simple mode operation

While pushing and holding [Ω Ω CLR], turn power ON
to turn the Simple mode operation ON.
• "-" appears upper-right corner on the display.
• Repeat above procedure to turn the Simple mode opera-
tion OFF.
NOTE: While in simple operating mode, Quick set
mode, Initial set mode, Frequency indication are re-
stricted.
BASIC OPERATION
[I/O]
NOTE: If you want to change the operating mode
on the channel permanently, refer to channel pro-
gramming. (pgs. 31, 32)
Simple mode indication
[I/O]
2
[∫]/[√]
[Ω CLR]/[OK ≈]
-
[Ω CLR]
2
10