Remote connector interface
This item selects the interface format for [REMOTE]
connector from NMEA or RS-232C. (default: NMEA)
Tuner ending condition
This item selects the tuner (AT230) stop condition
when the SWR is high from NULL or EDGE.
When "NULL" is selected, the tuner stops the best po-
sition even still SWR is high. When "EDGE" is selected,
the tuner stops at band edge, means tune is cancelled.
TX by PTT
This item selects the modulation input from MIC con-
nector or ACC connector while pushing microphone's
PTT switch.
TX by ACC
This item selects the modulation input from MIC con-
nector or ACC connector while keying ACC connec-
tor.
(default: NULL)
(default: MIC)
(default: ACC)
é-REMOTE-MOD-A/M
--REMOTE-I/F-ç-NMEA-å
--TUNER-STOP-NULL
--TX-by-PTT--MIC
è-TX-by-ACC--ACC
é-REMOTE-MOD-A/M
--REMOTE-I/F-NMEA
--TUNER-STOP-ç-NULL-å
--TX-by-PTT--MIC
è-TX-by-ACC--ACC
é-REMOTE-MOD-A/M
--REMOTE-I/F-NMEA
--TUNER-STOP-NULL
--TX-by-PTT--ç-MIC-å
è-TX-by-ACC--ACC
é-REMOTE-MOD-A/M
--REMOTE-I/F-NMEA
--TUNER-STOP-NULL
--TX-by-PTT--MIC
è-TX-by-ACC--ç-ACC-å
6
SET MODE
6
44