Icom IC-F7000 Instruction Manual page 42

6
SET MODE
RIT
This item adjusts the clarity control from –150 Hz to
+150 Hz.
Mode
This item selects the channel operating mode tempo-
rary from USB, AM, LSB, AFSK, FSK, CW, ALE-U,
ALE-L and EMAIL.
Beep Level
This item adjusts the confirmation beep level from 0
(OFF) to 10 (Maximum).
Preamplifier (Frequency indication only)
This item sets the receiver preamplifier function ON
or OFF.
Turn this item ON when receiving weak signal.
SPLIT (Frequency indication only)
This item sets the split function function ON or OFF.
When ON is selected, push [OK ≈ ≈ ] to edit the offset
frequency setting.
39
(default: 0)
(default: 5)
(default: ON)
(default: OFF)
é-SQL-LV----30
--FILTER----WIDE
--RIT-------ç-0-å
--MODE------USB
--BEEP-LV---5
é-SQL-LV----30
--FILTER----WIDE
--RIT-------0
--MODE------ç--USB---å
--BEEP-LV---5
é-SQL-LV----30
--FILTER----WIDE
--RIT-------0
--MODE------USB
--BEEP-LV---ç-5-å
Q-SET-MODE(VFO)
--MODE------USB
--SQL-LV----30
--PRE-AMP---ç-ON-å
è-RF-GAIN---9
é-RIT-------0
--SPLIT-----ç-OFF-å
--BEEP-LV---7