Basic Operation - Icom IC-2SA Instruction Manual

BASIC OPERATION 4 Sa
4.1 Setting a frequency | MUSING THE 100 kHz TUNING STEP
The 100 kHz tuning step provides quick frequency selec-
1) Rotate [VOL] to turn power ON. tion.
2) Be sure VFO mode is selected. 1) Push [FUNC] then rotate the tuning control.
elf "MR" appears above the me-
mory channel number, push
[V/M] to select VFO mode.
2) Push [FUNC] again to return to normal step operation.
Appears "Ti
3) Rotate the tuning control to set an
operating frequency.
- [EXAMPLE] Setting a frequency using the tuning control with the [FUNC] switch.
—'\ —~\
8600 o} com CS 529 o) EY [see g