Configuring An Address Pool For The Dhcp Server; Configuration Task List; Creating A Dhcp Address Pool - HP 4800G Series Configuration Manual

Configuring an Address Pool for the DHCP Server

Configuration Task List

Complete the following tasks to configure an address pool:

Creating a DHCP Address Pool

Configuring an Address
Allocation Mode for a
Common Address Pool
Configuring Dynamic Address Allocation for an Extended Address
Pool
Configuring a Domain Name Suffix for the Client
Configuring DNS Servers for the Client
Configuring WINS Servers and NetBIOS Node Type for the Client
Configuring the BIMS Server Information for the Client
Configuring Gateways for the Client
Configuring Option 184 Parameters for the Client with Voice Service
Configuring the TFTP Server and Bootfile Name for the Client
Configuring Self-Defined DHCP Options
Creating a DHCP Address Pool
When creating a DHCP address pool, specify it as a common address pool or an extended address
pool.
Follow these steps to create a DHCP address pool:
To do...
Enter system view
Create a DHCP address pool
and enter its view
A common address pool and an extended address pool are different in address allocation mode
configuration. Configurations of other parameters (such as the domain name suffix and DNS server
address) for them are the same.
Task
Configuring manual address allocation
Configuring dynamic address allocation
Use the command...
system-view
dhcp server ip-pool
pool-name [ extended ]
2-4
Remarks
Required
Required to configure
either of the two for the
common address pool
configuration
Required for the extended
address pool configuration
Optional
Remarks
—
Required
No DHCP address pool is
created by default.