Script Files; Configuring The Dhcp Server; Configuration Guidelines; Configuring The Dhcp Server When An Http File Server Is Used - HP 10500 Series Configuration Manual

Hide thumbs Also See for 10500 Series:
Table of Contents

Advertisement

Script files

Script files can be used for automatic software upgrade and automatic configuration. The device
supports Python scripts (.py files) and Tcl scripts (.tcl files). For more information about Python and Tcl
scripts, see "Using Python" and "Using Tcl."
To prepare script files:
For devices that share all or some configurations, create a script file that contains the common
configurations.
For the other devices, create a separate script file for each of them.

Configuring the DHCP server

The DHCP server assigns the following items to devices that need to be automatically configured:
IP addresses.
Paths of the configuration files or scripts.

Configuration guidelines

When you configure the DHCP server, follow these guidelines:
For devices for which you have prepared different configuration files, perform the following tasks for
each of them on the DHCP server:
Create a DHCP address pool.
Configure a static address binding.
Specify a configuration file or script file.
For devices for which you have prepared the same configuration file, perform the following tasks on
the DHCP server:
Create a DHCP address pool for the devices.
Configure a static address binding for each of the devices in the address pool.
Specify the configuration file for the devices.
If all devices on a subnet share the same configuration file or script file, perform the following tasks
on the DHCP server:
Configure dynamic address allocation.
Specify the configuration file for the devices.
The configuration file can contain only the common settings for the devices. You can provide a
method for the device administrators to change the configurations after their devices start up.

Configuring the DHCP server when an HTTP file server is used

Step
1.
Enter system view.
2.
Enable DHCP.
Command
system-view
dhcp enable
203
Remarks
N/A
By default, DHCP is disabled.

Advertisement

Table of Contents
loading

Table of Contents