Interleaved 2 Of 5 User Id; Pdf-417 User Id - Intermec 700 Series User Manual
Color mobile computer
Hide thumbs
Also See for 700 Series:
- User manual (480 pages) ,
- Quick start manual (36 pages) ,
- Instructions manual (6 pages)
Table of Contents
Advertisement
Control Panel Applets
Code 93 User ID
If "1" was selected in the Symbology ID parameter, you can set your own ASCII
character to identify Code 93 bar code data. Note that this is not available when
you use an imager with your 700 Series Computer.
Action:
SNMP OID:
Options:
Interleaved 2 of 5 User ID
If "1" was selected in the Symbology ID parameter, you can set your own ASCII
character to identify Interleaved 2 of 5 bar code data. Note that this is not avail-
able when you use an imager with your 700 Series Computer.
Action:
SNMP OID:
Options:
PDF-417 User ID
If "1" was selected in the Symbology ID parameter, you can set your own ASCII
character to identify PDF 417 bar code data. Note that this is not available when
you use an imager with your 700 Series Computer.
Action:
SNMP OID:
Options:
MSI User ID
If "1" was selected in the Symbology ID parameter, you can set your own ASCII
character to identify MSI bar code data. Note that this is not available when you
use an imager with your 700 Series Computer.
Action:
SNMP OID:
Options:
A-26
700 Series Color Mobile Computer User's Manual
Tap (+) to expand the Symbology ID parameter, select the Code 93 user
ID parameter, then enter a user ID value to change this parameter setting.
1.3.6.1.4.1.1963.15.3.3.4.1.4.1
x
where x is a single ASCII character. Default is asterisk (*).
Tap (+) to expand the Symbology ID parameter, select the Interleaved 2
of 5 user ID parameter, then enter a user ID value to change this
parameter setting.
1.3.6.1.4.1.1963.15.3.3.4.1.10.1
x
where x is a single ASCII character. Default is I (not lowercase L).
Tap (+) to expand the Symbology ID parameter, select the PDF 417 user
ID parameter, then enter a user ID value to change this parameter setting.
1.3.6.1.4.1.1963.15.3.3.4.1.12.1
x
where x is a single ASCII character. Default is an asterisk (*).
Tap (+) to expand the Symbology ID parameter, select the MSI user ID
parameter, then enter a user ID value to change this parameter setting.
1.3.6.1.4.1.1963.15.3.3.4.1.1 1.1
x
where x is a single ASCII character. Default is D.
APPENDIX A
Advertisement
Table of Contents
