Bar Code Labels - Intermec 700 Series User Manual

Bar Codes

Bar Code Labels

You can change some settings on your 700 Series Computer by scanning the fol-
lowing Code 39 bar code labels.
" NOTE:
When you use a bar code creation utility to make a scannable bar code label, the utility prob-
ably adds opening and closing asterisks automatically. Asterisks are included here for
translation purposes.
Audio Volume
Note that parameter information is on page B-8.
Turn Audio Off
Set Audio Volume to very quiet
Set Audio Volume to quiet
Set Audio Volume to normal
(default) (d f
Set Audio Volume to loud
Set Audio Volume to very loud
C-8 700 Series Color Mobile Computer User's Manual
You can use the Unit Manager application to set the Automatic Shutoff,
Volume, Backlight Timer, or Key Clicks parameters (starting on page B-4).
You can use the Unit Manager application or the Data Collection control
panel to set the three Virtual Wedge parameters (starting on page A-37).
lt)
*$+BV0* *$+BV0*
*$+BV0*
*$+BV1* *$+BV1*
*$+BV1*
*$+BV2* *$+BV2*
*$+BV2*
*$+BV3* *$+BV3*
*$+BV3*
*$+BV4* *$+BV4*
*$+BV4*
*$+BV5* *$+BV5*
*$+BV5*
APPENDIX C