Snmp; Security; Traps - Intermec 700 Series User Manual

APPENDIX B
Virtual Wedge
Within the Unit Manager, select Configuration Management → Data
Collection, then click the Virtual Wedge tab to access the following
parameters. Options for these parameters are listed on the page provided.
These are listed in alphabetical order.
"
"
"
"
"

SNMP

Within the Unit Manager, click Configuration from the left navigation bar,
then click the SNMP icon to access any of these tabs: Security, Traps, or Identifi-
cation.

Security

Within the Unit Manager, select Configuration Management → SNMP, then
click the Security tab to access the following parameters. Options for these pa-
rameters are listed on the page provided. These are listed in alphabetical order.
"
"
"
"
"

Traps

Within the Unit Manager, select Configuration Management → SNMP, then
click the Traps tab to access the following parameters. Options for these param-
eters are listed on the page provided. These are listed in alphabetical order.
"
"
Identification
Within the Unit Manager, select Configuration Management → SNMP, then
click the Identification tab to access the following parameters. Options for
these parameters are listed on the page provided. These are listed in alphabeti-
cal order.
"
"
"
Code Page (page A-41)
Grid (page A-40)
Postamble (page A-39)
Preamble (page A-38)
Virtual Wedge (page A-37)
Encryption Key (page A-47)
Read Encryption (page A-45)
Read Only Community (page A-43)
Read/Write Community (page A-44)
Write Encryption (page A-46)
Authentication (page A-48)
Threshold (page A-49)
Contact (page A-50)
Location (page A-52)
Name (page A-51)
700 Series Color Mobile Computer User's Manual
Unit Manager
B-3