Intermec 700 Series User Manual page 211

Programming
[DestinationDirs]
This describes the names and paths of the destination directories for the applica-
tion on the target device. Note Windows CE does not support directory identifiers.
Required?
file_list_section:
EXAMPLE:
[DestinationDirs]
Files.Common
Files.Shared
[CopyFiles]
This section, under the [DefaultInstall] section, describes the default files to
copy to the target device. Within the [DefaultInstall] section, files were listed
that must be defined elsewhere in the INF file. This section identifies that map-
ping and may contain flags.
Required?
copyfile_list_section:
copyfile_list_section:
7-6 700 Series Color Mobile Computer User's Manual
Yes
0,subdir
String that identifies the destination directory. The following list shows the
string substitutions supported by Windows CE. These can be used only for
the beginning of the path. \
%CE1% \Program Files
%CE2% \Windows
%CE3% \My Documents
%CE4% \Windows\Startup
%CE5% \My Documents
%CE6% \Program Files\Accessories
%CE7% \Program Files\Communication
%CE8% \Program Files\Games
%CE9% \Program Files\Pocket Outlook
%CE10% \Program Files\Office
%CE11% \Windows\Start Menu\Programs
%CE12% \Windows\Start Menu\Programs\Accessories
%CE13% \Windows\Start Menu\Programs\Communications
%CE14% \Windows\Start Menu\Programs\Games
%CE15% \Windows\Fonts
%CE16% \Windows\Recent
%CE17% \Windows\Start Menu
%InstallDir%
Contains the path to the target directory selected during installation. It is
declared in the [CEStrings] section
%AppName%
Contains the application name defined in the [CEStrings] section.
= 0,%CE1%\My Subdir
= 0,%CE2%
Yes
The source_filename parameter is optional if it is the same as
destination_filename.
The numeric value that specifies an action to be done while copying files.
The table on the next page shows values supported by Windows CE.
; \Program Files\My Subdir
; \Windows
destination_filename,[source_filename]
flags
SECTION 7