Is9Cconfig::getcodabar - Intermec 700 Series User Manual

SECTION 6

IS9CConfig::GetCodabar

This function retrieves the current settings of Codabar symbology.
Syntax:
Parameters:
Return Values:
HRESULT IS9CConfig::GetCodabar(
ITC_CODABAR_DECODING* peDecode,
ITC_CODABAR_START_STOP* peSS, ITC_CODABAR_CLSI* peCLSI,
ITC_CODABAR_CHECK_DIGIT* peCheck,
ITC_BARCODE_LENGTH_ID* peLengthId, BYTE rgbLengthBuff[],
DWORD* pdwNumBytes );
peDecode [out]
peSS [out]
peCLSI [out]
peCheck [out]
peLengthId [out]
rgbLengthBuff [out,size_is(3)]
pdwNumBytes [out]
HRESULT that indicates success or failure.
Pointer to the ITC_CODABAR_DECODING
location to receive the decoding for Codabar
symbology.
Pointer to the ITC_CODABAR_START_STOP
location to receive the Start/Stop option.
Pointer to the ITC_CODABAR_CLSI location to
receive the CLSI library system.
Pointer to the ITC_CODABAR_CHECK_DIGIT
location to receive the check digit.
Pointer to the ITC_BARCODE_LENGTH_ID
location to receive an indicator of either
ITC_BARCODE_LENGTH or
ITC_BARCODE_FIXED_LENGTH.
An array of bytes to receive 1 byte of data for
ITC_BARCODE_LENGTH, or 3 bytes of data for
ITC_BARCODE_FIXED_LENGTH.
Pointer to the DWORD location to receive a
number indicating number of bytes in
rbgLengthBuff[]: 1 byte for
ITC_BARCODE_LENGTH or 3 bytes for
ITC_BARCODE_FIXED_LENGTH.
700 Series Color Mobile Computer User's Manual
Scanner Support
6-29