Plessey - Intermec 700 Series User Manual

APPENDIX A

Plessey

Plessey is a pulse-width modulated symbology like most other bar codes. It in-
cludes a start character, data characters, an eight-bit cyclic check digit, and a
termination bar. The code is continuous and not self-checking. You need to con-
figure two parameters for Plessey code: Start Code and Check Digit.
Action:
SNMP OID:
Options:
" NOTE:
If "1" is selected for Bar code length, then Minimum length is entered.
Tap (+) to expand the Plessey parameter, select the setting to be changed,
then select an option to change this setting or select an option from the
drop-down list.
1.3.6.1.4.1.1963.15.3.3.1.1.10.1
Decoding 0
1
Check digit 0
1
Bar code length 0
1
Minimum length 001–254 Minimum bar code length 1–254 (6)
Not active (default)
Active
Not transmitted (default)
Transmitted
Any length (default)
Minimum length
700 Series Color Mobile Computer User's Manual
Control Panel Applets
A-13