Intermec 700 Series User Manual page 106

SECTION 4
Terminal Application
Tap Terminal App from the Details page to send standard AT commands. In-
formation about these AT commands are available under "AT Command Inter-
face" on page 4-30.
Select an AT command from the drop-down list, then tap Send. The results of
each test appears in the text box. Tap Exit or ok to close this screen and return
to the Details page.
Firmware Date (GSM/GPRS):
This provides the last date when this firmware was updated, if available.
IMSI # (GSM/GPRS):
This shows the IMSI (International Mobile Subscriber Identity) number
assigned to the SIM card installed in this 700 Series Computer.
700 Series Color Mobile Computer User's Manual
Network Support
4-29