Encryption Key - Intermec 700 Series User Manual

APPENDIX A

Encryption Key

Identifies the key that this 700 Series Computer uses to encrypt or decipher
SNMP packets. Encryption is used only by software provided by Intermec
Technologies. If encryption is enabled, SNMP management platforms will not be
able to communicate with the 700 Series Computer. The encryption key is re-
turned encrypted.
Action:
" NOTE:
You also need to set either Read Encryption (page A-45) or Write Encryption (page A-46)
or both.
SNMP OID:
Options:
Tap the Encryption Key parameter, then enter a security encryption key
value to change this parameter setting.
1.3.6.1.4.1.1963.10.5.1.6.0
The encryption key can be from 4 to 20 ASCII characters. Default is
NULL.
700 Series Color Mobile Computer User's Manual
Control Panel Applets
A-47