Intermec 700 Series User Manual page 117

Network Support
MIB-II Item OID
ipAdEntIfIndex 1.3.6.1.2.1.4.20.1.2.IpAddress
ipAdEntNetMask 1.3.6.1.2.1.4.20.1.3.IpAddress
Configuring with SNMP
The community string allows an SNMP manager to manage the 700 Series Com-
puter with a specified privilege level. The default read-only community string is
"public" and "private" is the default read/write community string. See the specif-
ic configuration parameter to find its OID.
To configure the 700 Series Computers using SNMP:
1. Configure your 700 Series Computers for RF or Ethernet communications.
2. Determine the OID (Object Identifier) for the parameter to be changed.
3. Use your SNMP management station to get and set variables that are de-
4-40 700 Series Color Mobile Computer User's Manual
Table 4-1 (Continued)
MIB Object Identifiers
The Intermec base OID is 1.3.6.1.4.1.1963.
fined in the Intermec MIBs. You can set the traps, identification, or securi-
ty configuration parameters for SNMP. See Appendix A, "Control Panel Ap-
plets," to learn more about these parameters.
Group or
Table Description
IP address Table The index value that uniquely
(ipAddrTable) identifies the interface to which
this entry is applicable (same as
ifIndex).
IP address Table The subnet mask associated with
(ipAddrTable) the IP address of this entry (same
as Subnet Mask).
SECTION 4