Telepen User Id - Intermec 700 Series User Manual
Color mobile computer
Hide thumbs
Also See for 700 Series:
- User manual (480 pages) ,
- Quick start manual (36 pages) ,
- Instructions manual (6 pages)
Table of Contents
Advertisement
Control Panel Applets
EAN 8 User ID
If "1" was selected in the Symbology ID parameter, you can set your own ASCII
character to identify EAN-8 bar code data. Note that this is not available when
you use an imager with your 700 Series Computer.
Action:
SNMP OID:
Options:
EAN 13 User ID
If "1" was selected in the Symbology ID parameter, you can set your own ASCII
character to identify EAN-13 (European Article Numbering) bar code data. Note
that this is not available when you use an imager with your 700 Series Computer.
Action:
SNMP OID:
Options:
Matrix 2 of 5 User ID
If "1" was selected in the Symbology ID parameter, you can set your own ASCII
character to identify Matrix 2 of 5 bar code data. Note that this is not available
when you use an imager with your 700 Series Computer.
Action:
SNMP OID:
Options:
Telepen User ID
If "1" was selected in the Symbology ID parameter, you can set your own ASCII
character to identify Telepen bar code data. Note that this is not available when
you use an imager with your 700 Series Computer.
Action:
SNMP OID:
Options:
A-28
700 Series Color Mobile Computer User's Manual
Tap (+) to expand the Symbology ID parameter, select the EAN 8 user ID
parameter, then enter a user ID value to change this parameter setting.
1.3.6.1.4.1.1963.15.3.3.4.1.8.1
x
where x is a single ASCII character. Default is \xFF.
Tap (+) to expand the Symbology ID parameter, select the EAN 13 user
ID parameter, then enter a user ID value to change this parameter setting.
1.3.6.1.4.1.1963.15.3.3.4.1.9.1
x
where x is a single ASCII character. Default is F.
Tap (+) to expand the Symbology ID parameter, select the Matrix 2 of 5
user ID parameter, then enter a user ID value to change this parameter
setting.
1.3.6.1.4.1.1963.15.3.3.4.1.24.1
x
where x is a single ASCII character. Default is D.
Tap (+) to expand the Symbology ID parameter, select the Telepen user
ID parameter, then enter a user ID value to change this parameter setting.
1.3.6.1.4.1.1963.15.3.3.4.1.25.1
x
where x is a single ASCII character. Default is an asterisk (*).
APPENDIX A
Advertisement
Table of Contents
