Contact - Intermec 700 Series User Manual

Control Panel Applets
Identification
To access the settings from the 700 Series Computer, tap Start → Settings →
the System tab → the SNMP icon → the Identification tab to access its
parameters.
The following are parameters for contact, location, and name information for
support purposes. Note that these are listed in the order of their appearance with-
in the Identification tab.

Contact

Sets the contact information for the person responsible for this 700 Series Com-
puter.
Action:
SNMP OID:
Options:
A-50 700 Series Color Mobile Computer User's Manual
Tap the Contact parameter, then enter the name of your contact
representative to change this parameter setting.
1.3.6.1.2.1.1.4.0
The identification contact may be up to 255 ASCII characters. Default is no
characters or blank.
APPENDIX A