Code 128 Fnc1 Character - Intermec 700 Series User Manual

Control Panel Applets

Code 128 FNC1 Character

The Code 128 FNC1 character (EAN 128 norms) can be any ASCII character and
is used as a separator when multiple identifiers and their fields are concate-
nated. Non-printable ASCII characters can be entered using the following syn-
tax where HH is the hexadecimal value of the character.
\xHH
For example, the GS character, whose hexadecimal value is 1D, would be en-
tered as \x1D. In addition,the following characters have their own identifiers:
Action:
SNMP OID:
Options:
A-12 700 Series Color Mobile Computer User's Manual
BEL \a
BS \b
FF \f
LF \n
CR \r
HT \t
VT \v
Tap (+) to expand the Code 128 parameter, then type the ASCII characters
to be set for the Code 128 FNC1 character parameter.
1.3.6.1.4.1.1963.15.3.3.1.1.21.1
Any ASCII character (default is the GS function character — ID hex)
APPENDIX A