Preamble - Intermec 700 Series User Manual

Control Panel Applets

Preamble

Sets the preamble that precedes any data you scan with the 700 Series Comput-
er. Common preambles include a data location number or an operator number.
Action:
SNMP OID:
Syntax:
" NOTE:
When you enter the AD command without data, the preamble is disabled. If you want to use
quotation marks or these combinations of characters:
AD
AE
AF
KC
BV
EX
DF
as part of the appended data, separate those characters from the AD command with quotes.
If you do not use quotes as described here, the 700 Series Computer will interpret the char-
acters as another configuration command. See the following example:
To use the two-character string BV as a preamble, scan this command (as a Code 39 label)
EXAMPLE:
or send this command through the network: $+AD"BV"
A-38 700 Series Color Mobile Computer User's Manual
Tap the Preamble parameter, then enter a preamble value to change this
parameter setting.
1.3.6.1.4.1.1963.15.3.2.1.1.3.1
ADdata
where data is any acceptable values up to 31 ASCII characters. Embedded
null (<NUL >) characters are not allowed. Default is no characters
(disabled).
APPENDIX A