Intermec 700 Series User Manual page 274

APPENDIX A
Code 11 User ID
If "1" was selected in the Symbology ID parameter, you can set your own ASCII
character to identify Code 11 bar code data. Note that this is not available when
you use an imager with your 700 Series Computer.
Action:
SNMP OID:
Options:
Tap (+) to expand the Symbology ID parameter, select the Code 11 user
ID parameter, then enter a user ID value to change this parameter setting.
1.3.6.1.4.1.1963.15.3.3.4.1.16.1
x where x is a single ASCII character. Default is asterisk (*).
700 Series Color Mobile Computer User's Manual
Control Panel Applets
A-29