Control Panel Applets
Traps
To access the settings from the 700 Series Computer, tap Start → Settings →
the System tab → the SNMP icon → the Traps tab to access its parameters.
The following are authentication and threshold parameters for traps. Note that
these are listed in the order of their appearance within the Traps tab.
Authentication
Determines whether to send authentication traps. When trap authentication is
enabled, an authentication trap is sent if an SNMP packet is received by the
master agent with an invalid community string.
Action:
SNMP OID:
Options:
A-48
700 Series Color Mobile Computer User's Manual
Tap the Authentication parameter, then select an option to change this
parameter setting.
1.3.6.1.4.1.1963.10.5.2.2.0
1
On (default)
2
Off
APPENDIX A