Intermec 700 Series User Manual page 301

Control Panel Applets
A-56 700 Series Color Mobile Computer User's Manual
PDWPM0C:
This is the installer for the Wireless Printing Demo application. To run this
demonstration, tap Start → Programs → the Wireless Printing Demo
icon. Press Help in the demo application for more information.
S9C Upgrade:
Installs the files needed to upgrade the S9C scanner firmware. See Section
3, "Installing Applications and Updating System Software," for more infor-
mation about upgrading the firmware.
SDK:
Installs the Intermec Software Developer's Kit (SDK). See the SDK User's
Manual for more information.
Unit Manager:
Installs the Unit Manager application which provides tools for remotely
managing the 700 Series Computer.
Unit Manager Help:
Installs the online help for the Unit Manager application.
WinCfg:
Configures the NRINET.INI file, launches the NRINet client, and loads and
unloads the LAN and WLAN device drivers. See the Windows 95 and Win-
dows CE Configuration Utilities Reference Manual (P/N: 978-054-010) for
more information.
Wireless Printing Sample:
Installs a sample application that developers can use for reference when
they are developing their own Wireless Printing applications. The source
code for this application is included as part of the Wireless Printing SDK on
the 700C Tools CD. See the SDK User's Manual for more information.
ActiveX Control Tools:
This lists some of the CAB files that may be available with which to install
ActiveX Control Tools. See the SDK Online Help for more information.
AXCommunication:
Communication controls that transmit or receive messages from input
connections.
AXFileTransfer:
File transfer controls that transmit and receive files using the Trivial
File Transfer Protocol (TFTP).
AXReaderCommand:
Reader command functions that modify and retrieve configuration infor-
mation from your 700 Series Computer.
AXSystemPower:
The System Information control that retrieves the battery charge status.
AXVWedge:
The virtual wedge control that retrieves scanned ADC data and sends it
to the keyboard driver to interpret data as keyboard input.
BarCodeMFCClient:
The bar code reader control that collect bar code information from the
700 Series Computer, configures the scanner, and provides audio or visu-
al feedback when data arrives.
ITCAXUtilityEX:
Utility functions that performs a warm-boot or a cold-boot on the 700 Se-
ries Computer and assumes control over the suspend/resume function.
APPENDIX A