Using Installation Functions In Setup.dll - Intermec 700 Series User Manual

Programming
intermec.bmp,,,0
rpmlogo.bmp,,,0
rpmname.bmp,,,0
import.bmp,,,0
export.bmp,,,0
clock.bmp,,,0
printer.bmp,,,0
filecopy.bmp,,,0
[Files.Intl]
lang_eng.bin,,,0
[Files.TelecomNcsCE]
ncsce.exe,,,0
nrinet.dll,,,0
[Files.Windows]
readme.txt,,,0
[Files.Import]
readme.txt,,,0
[Files.Export]
readme.txt,,,0
[Files.Work]
readme.txt,,,0
[Files.WinCE]
wcestart.ini,,,0
[RegSettings.All]
HKLM,"SOFTWARE\Microsoft\Shell\AutoHide",,0x00010001,1
HKLM,"SOFTWARE\Microsoft\Shell\OnTop",,0x00010001,0
HKLM,"SOFTWARE\Microsoft\Clock",SHOW_CLOCK,0x00010001,0

Using Installation Functions in SETUP.DLL

SETUP.DLL is an optional file that enables you to perform custom operations
during installation and removal of your application. The following list shows the
functions that are exported by SETUP.DLL.
" NOTE:
Use [DefaultInstall] → CESelfRegister (page 7-4) in the .INF file to point to SETUP.DLL.
7-10 700 Series Color Mobile Computer User's Manual
Install_Init
Called before installation begins. Use this function to check the application
version when reinstalling an application and to determine if a dependent
application is present.
Install_Exit
Called after installation is complete. Use this function to handle errors
that occur during application installation.
Uninstall_Init
Called before the removal process begins. Use this function to close the ap-
plication, if the application is running.
Uninstall_Exit
Called after the removal process is complete. Use this function to save da-
tabase information to a file and delete the database and to tell the user
where the user data files are stored and how to reinstall the application.
SECTION 7
; Autohide the taskbar
; Shell is not on top
; Clock is not on taskbar