Plessey User Id - Intermec 700 Series User Manual
Color mobile computer
Hide thumbs
Also See for 700 Series:
- User manual (480 pages) ,
- Quick start manual (36 pages) ,
- Instructions manual (6 pages)
Table of Contents
Advertisement
APPENDIX A
Plessey User ID
If "1" was selected in the Symbology ID parameter, you can set your own ASCII
character to identify Plessey bar code data. Note that this is not available when
you use an imager with your 700 Series Computer.
Action:
SNMP OID:
Options:
Standard 2 of 5 User ID
If "1" was selected in the Symbology ID parameter, you can set your own ASCII
character to identify Standard 2 of 5 bar code data. Note that this is not avail-
able when you use an imager with your 700 Series Computer.
Action:
SNMP OID:
Options:
UPC A User ID
If "1" was selected in the Symbology ID parameter, you can set your own ASCII
character to identify UPC-A (Universal Product Code) bar code data. Note that
this is not available when you use an imager with your 700 Series Computer.
Action:
SNMP OID:
Options:
UPC E User ID
If "1" was selected in the Symbology ID parameter, you can set your own ASCII
character to identify UPC-E bar code data. Note that this is not available when
you use an imager with your 700 Series Computer.
Action:
SNMP OID:
Options:
Tap (+) to expand the Symbology ID parameter, select the Plessey user
ID parameter, then enter a user ID value to change this parameter setting.
1.3.6.1.4.1.1963.15.3.3.4.1.13.1
x
where x is a single ASCII character. Default is D.
Tap (+) to expand the Symbology ID parameter, select the Standard 2 of
5 user ID parameter, then enter a user ID value to change this parameter
setting.
1.3.6.1.4.1.1963.15.3.3.4.1.23.1
x
where x is a single ASCII character. Default is D.
Tap (+) to expand the Symbology ID parameter, select the UPC A user
ID parameter, then enter a user ID value to change this parameter setting.
1.3.6.1.4.1.1963.15.3.3.4.1.6.1
x
where x is a single ASCII character. Default is A.
Tap (+) to expand the Symbology ID parameter, select the UPC E user
ID parameter, then enter a user ID value to change this parameter setting.
1.3.6.1.4.1.1963.15.3.3.4.1.7.1
x
where x is a single ASCII character. Default is E.
700 Series Color Mobile Computer User's Manual
Control Panel Applets
A-27
Advertisement
Table of Contents
